The 2CanCall system is based on the SIP standard. This makes it interoperable with many makes and models of handsets.
Unlike traditional systems where you have to buy the handset from the same manufacturer (a panasonic handset will only work with a panasonic PBX, for example), you can purchase a range of phones which are suitable for YOUR business needs, not the phone the manufacturer says you have to use.
Here's a selection of recommended handsets and devices that work well with the 2CanCall system.
 |
The Snom 300 is a basic IP phone.
The phone fulfils the most important requirements of VoIP telephony whilst additionally numerous functions that are indispensable to the business world. 2-line display, 6 Programmable Keys
Keys can be re-programmed to perform any function, and the handset is remotely managed via a web browser.
Snom 300 Datasheet
|
 |
The Snom 320 is a fully featured Voice over IP telephone specifically designed for business use. More buttons than a Snom 300, smaller display than the Snom360.
Supports 802.3af Power over Ethernet , 12 Programmable Keys
All the keys on the snom 320 can be re-programmed to perform any function, and the handset is fully managed via a web browser
Snom 320 Datasheet
|
 |
The Snom 360 is a fully featured Voice over IP telephone specifically designed for high-end business use.
Supports 802.3af Power over ethernet, Large LCD Display, 12 programmable keys, Expansion Module available for additional function keys or speed dial buttons.
All the keys can be re-programmed to perform any function, and the handset is fully managed via a web browser.
Snom 360 Datasheet
|
 |
The Snom 370 is a more advanced version of the 360 handset, with higher resolution screen
Snom 370 Datasheet
|
 |
The Snom M3 Handset is a cordless DECT handset which connects via VoIP to a PBX. Multiple handsets can be registered with the same base station.
Snom M3 Datasheet |
| 
